Chrome Rear Shock Absorbers: Honda CL250 CL 250 (1981-1984) Kawasaki GPZ600 If the readings are above

If the readings are above what your manual states (commonly no greater than 15 volts but can vary from bike to bike so check your manual) then please remove the rectifier and contact us directly

Kawasaki (K)Z 750 L1-L4 (1981-1984)

Kawasaki KX 85 C (2014)

These GN250 steering bearings are taper roller style bearings

ACI603 & ACI604 or if you have an EFI Technology unit it will replace the following CDI stamped units AC2i

Chrome Rear Shock Absorbers: Honda CL250 CL 250 (1981-1984) Kawasaki GPZ600 If the readings are aboveBrand new set of chrome rear shock absorbers to fit: Honda CL 250 SC (1981 1984). This set of rear shocks is designed to replace the original factory shocks on a Honda CL250 for the years shown above. The models are: SC It has 325mm pin pin mounting points and a 40mm shroud. The top pin bush is 14mm, the bottom is 10mm (You may need to change these to the required sizes). The shocks are chrome which can be seen in the picture. You'll receive the exact